Answers are grounded in this paper and cite their sources.
ATCC 21332 culture by one-stage dead-end and cross-flow ultrafiltration (UF) was studied. Dead-end experiments were first performed to select suitable conditions, including the amount of added ethanol-a micelle-destabilizing solvent (0-70 vol%), type (polyethersulfone, polyacrylonitrile, poly(vinylidene fluoride)) and molecular-weight cut-off (MWCO, 30-100 kDa) of the membrane in the surfactin concentration range of 0.25-1.23 g/L. Then, the cross-flow UF experiments were conducted to check the recovery performance in the ranges of feed surfactin concentration of 1.13-2.67 g/L, flow velocity of 0.025-0.05 m/s, and transmembrane pressure of 40-100 kPa. The Hermia model was also used to clarify membrane fouling mechanisms. Finally, three cleaning agents and two in situ cleaning ways (flush and back-flush) were selected to regain the permeate flux. As for the primary recovery of surfactin from the permeate in cross-flow UF, a polyethersulfone membrane with 100-kDa MWCO was suggested, and the NaOH solution at pH 11 was used for membrane flushing.
No takes yet. Share an insight, caveat, or question.
Tran et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: