PSI research in the ITER divertor parameter range at the FOM PSI-lab

FOM-Rijnhuizen is building, in cooperation with its Trilateral Euregio Cluster (TEC) partners, a PSI-laboratory to study plasma surface interaction (PSI) under extreme, ITER relevant plasma conditions. The largest linear plasma generator of PSI-lab is Magnum-PSI, and is designed to deliver up to 10 MW m −2 power over a 10 cm diameter hydrogen plasma beam with an electron density ( n e ) up to 10 21 m −3 and electron-temperature ( T e ) between 1–5 eV. Magnum-PSI is presently under construction and its predesign is presented. Its forerunner is Pilot-PSI, in which record plasma parameters of n e =4 × 10 21 m −3 at T e =2 eV in a ∼1 cm wide hydrogen beam confined by a magnetic field (B) ⩽1.6 T were measured at 40 mm downstream the source nozzle. At 17 mm in front of a target (located at 0.56 m distance from the source nozzle), n e >10 21 m −3 and T e ⩽ 4 eV have been demonstrated. Initial experiments on exposing fine-grain carbon samples are presented that showed up to 20 μm s −1 erosion as a demonstration of the extreme plasma conditions. Spectroscopy was applied to compare chemical erosion yields for flux densities up to 5.0 × 10 24 m −2 s −1 .