Formation and Its Mechanism of High-speed Micro-grooving on Metal Surface by Angled CW Laser Irradiation

In general, pulsed lasers with high peak power have been used for the micro-groove formation.However, the processing speed is limited by the pulse repetition rate.On the other hand, CW laser can be expected to perform the high-speed processing by continuous energy input.The mechanism of micro-groove formation by CW laser was investigated by high-speed observation and the thermal fluid analysis.In the perpendicular irradiation of CW laser, the molten metal flows symmetrically around the keyhole to the backward direction, and micro-grooves remain at both edges of molten region.In contrast, in the angled irradiation, the molten metal at the reflection-side scatters as spatters.The remained molten metal flows from the reflection-side to the incident-side through the bottom of keyhole, since the recoil pressure is generated from the reflection-side to the incident-side.In addition, high-speed scanning contributes to keeping the sufficient time and force to move the molten metal in the backward direction.Then, the micro-groove remains at the reflection-side, while the upheaval is formed at the incident-side by gathering the molten metal from the reflection-side and the front of keyhole.Asymmetrical behavior of molten metal flow in angled irradiation of CW laser can create micro-groove in the reflection-side.