One Recording, Several Readings: Checking an AI Flaw Call in Non-Destructive Testing of Metals and Bridges Against the Instrument's Own Settings

Inspectors test welds, pipes, metal parts and bridges without breaking them, using ultrasound and X-rays, and AI programs now help to call out flaws. Today the AI gives one answer from one way of processing the recording. This note describes a simple check that can sit on top of any such program. The part is inspected once. From the raw recording the instrument holds, several pictures are made by changing only the instrument's own processing settings, within the range the maker and the inspection procedure permit. The AI reads every picture. If the answers stay together, the recording supports the flaw call firmly. If they spread out, the call depends on a setting and deserves a closer look. Other methods shake the data with invented changes, such as flips or artificial noise. This method uses the settings the instrument itself allows, so the uncertainty it measures is real, and it is read for each recording. One number, the spread value, tells which case it is. A computer-decided shunting action then moves the call that needs care to the front of a senior inspector's list, while all other calls carry on. The check needs no second visit, no second exposure and no change to the AI program or to the qualified procedure. Safer bridges, pipelines and aircraft parts, fewer needless stoppages and fewer repeat visits for inspectors are the benefits to society. Patent pending.