Adjusting LVAD to high-speed settings significantly reduced NT-proBNP release during exercise (P<.01) and improved maximum workload (P<.05), but did not significantly increase 6MWT distance (P=.10).
RCT (n=10)
p-value: p=<.05 for max workload and peak oxygen consumption; <.01 for NT-proBNP
INTRODUCTION: Left ventricular assist devices are crucial in rehabilitation of patients with end-stage heart failure. Whether cardiopulmonary function is enhanced with higher pump output is unknown. METHODS: 10 patients (aged 39±16 years, mean±SD) underwent monitored adjustment of pump speed to determine minimum safe low speed and maximum safe high speed at rest. Patients were then randomized to these speed settings and underwent three 6-minute walk tests (6MWT) and symptom-limited cardiopulmonary stress tests (CPX) on separate days. RESULTS: Pump speed settings (low, normal and high) resulted in significantly different resting pump flows of 4.43±0.6, 5.03±0.94, and 5.72±1.2 l/min (P<.001). There was a significant enhancement of pump flows (greater at higher speed settings) with exercise (P<0.05). Increased pump speed was associated with a trend to increased 6MWT distance (P=.10); and CPX exercise time (p=.27). Maximum workload achieved and peak oxygen consumption were significantly different comparing low to high pump speed settings only (P<.05). N-terminal-pro-B-type natriuretic peptide release was significantly reduced at higher pump speed with exercise (P<.01). CONCLUSIONS: We have found that alteration of pump speed setting resulted in significant variation in estimated pump flow. The high-speed setting was associated with lower natriuretic hormone release consistent with lower myocardial wall stress. This did not, however, improve exercise tolerance.
Hayward et al. (Tue,) conducted a rct in end-stage heart failure (n=10). Left ventricular assist device speed adjustment vs. low speed setting was evaluated on 6-minute walk test distance, cardiopulmonary stress test parameters, and NT-proBNP release (p=<.05 for max workload and peak oxygen consumption; <.01 for NT-proBNP). Adjusting LVAD to high-speed settings significantly reduced NT-proBNP release during exercise (P<.01) and improved maximum workload (P<.05), but did not significantly increase 6MWT distance (P=.10).