Key points are not available for this paper at this time.
Excessive end-to-end latency and insufficient update rate continue to be major limitations of virtual environment (VE) system performance. Beginning from a typical baseline VE in which a spatial tracker is polled to deliver data via an RS-232 interface at each update of a single application program, we examined a series of hardware and software reconfigurations with the aim of reducing end-to-end latency and increasing update rate. These reconfigurations included: (1) multiple asynchronous UNIX processes communicating via shared memory; (2) continuous streaming rather than polled tracker operation; (3) multiple rather than single tracker instruments; and (4) higher bandwidth IEEE-488 parallel communication between tracker and computer. Starting from an average latency of 65 msec and an update rate of 20 Hz for a standard 1000 polygon test VE, our most successful implementation to date runs at 60 Hz (the maximum achievable with our graphics display hardware) with approximately 30 msec average latency. Because our equipment and architecture is based on widely available hardware (i.e., SGI computer, Polhemus Fastrak) and software (i.e., Sense8 WorldToolKit), our techniques and results are broadly applicable and easily transferable to other VE systems.
Jacoby et al. (Wed,) studied this question.