Key points are not available for this paper at this time.
The data acquisition rate in medical ultrasonic imaging devices is limited by the acoustic propagation velocity in the tissues. Typically in such machines the image lines are produced sequentially one line per transmitted pulse. A parallel processing scheme has been implemented which enables the data acquisition rate to increase by a factor of four through the simultaneous acquisition of four B-mode image lines from each individual broadened transmit pulse. The higher data rate can be used to increase the image frame rate to produce independent images that can be averaged in the image frame to reduce noise, or to produce a conventional image at standard video frame rates while reducing patient exposure. Alternatively, the field of view can be increased over that of a normal scan without sacrificing frame rate. These advantages are achieved with little reduction in the measured resolution. The design and performance of this device are described. A sample in vivo image is included.
Shattuck et al. (Sun,) studied this question.