Key points are not available for this paper at this time.
Abstract Recently, oil and gas companies started to invest in fiber optic technology to remotely monitor subsurface response to stimulation. Distributed Acoustic Sensing (DAS) and Distributed Temperature Sensing (DTS) record vibration and temperature around the fiber, respectively. In this research, we introduce new seismic attributes calculated from the DAS data that could suggest cross-stage fluid communication during hydraulic fracturing. The DAS data covers the entire 28 stimulated stages of the lateral MIP-3H well close to Morgantown, WV. We calculated the energy attribute for the DAS data of the studied stages. Subsequently, a Hilbert transform is applied to the DAS data to evaluate the instantaneous frequency of each trace in the DAS. In addition, we applied a fast Fourier transform to each trace for all the SEGY files to calculate the dominant frequency with a 30 second temporal window. The dominant frequency is compared to the DTS data and energy attribute for the stages in the horizontal MIP-3H well. The DTS analysis shows that stimulation of the stages 10 causes a temperature rise in the previous stage 9; in contrast, stage 18 stimulation does not affect stage 17 temperature. We suggest that the common low frequency zone identified in instantaneous frequency and dominant frequency attributes between stages 10 and 9 is related to presence of fluid and gas that transferred cross-stage during hydraulic fracturing. The fluid and results in the frequency damping of the vibrations around the fiber. We show that the frequency attribute reveals increases detail about the stimulation than conventional signal energy attribute of the DAS data.
Ghahfarokhi et al. (Tue,) studied this question.