Key points are not available for this paper at this time.
Chemical interaction at a heterojunction interface induced by an appropriate chemical linker is of crucial importance for high efficiency, hysteresis-less, and stable perovskite solar cells (PSCs). Effective interface engineering in PSCs is reported via a multifunctional chemical linker of 4-imidazoleacetic acid hydrochloride (ImAcHCl) that can provide a chemical bridge between SnO2 and perovskite through an ester bond with SnO2 via esterification reaction and an electrostatic interaction with perovskite via imidazolium cation in ImAcHCl and iodide anion in perovskite. In addition, the chloride anion in ImAcHCl plays a role in the improvement of crystallinity of perovskite film crystallinity. The introduction of ImAcHCl onto SnO2 realigns the positions of the conduction and valence bands upwards, reduces nonradiative recombination, and improves carrier life time. As a consequence, average power conversion efficiency (PCE) is increased from 18.60% ± 0.50% to 20.22% ± 0.34% before and after surface modification, respectively, which mainly results from an enhanced voltage from 1.084 ± 0.012 V to 1.143 ± 0.009 V. The best PCE of 21% is achieved by 0.1 mg mL-1 ImAcHCl treatment, along with negligible hysteresis. Moreover, an unencapsulated device with ImAcHCl-modified SnO2 shows much better thermal and moisture stability than unmodified SnO2 .
Chen et al. (Mon,) studied this question.