Key points are not available for this paper at this time.
We present flexible transmissive structural color filters with high-color-purity based on a higher-order resonance suppression by inserting an ultrathin absorbing layer in the middle of a cavity. A 3rd order Fabry-Pérot (F-P) resonance, which exhibits a narrower bandwidth than a fundamental F-P resonance, is used to produce transmissive colors with an improved color purity. The thin absorbing layer is properly placed at a center of the cavity to highly suppress only a 5th order F-P resonance appearing at a short wavelength range while not affecting the 3rd order F-P resonance for color generation, thus being able to attain the high-color-purity transmissive colors without reducing a transmission efficiency. In addition, angle-insensitive properties are achieved by compensating a net phase shift with a dielectric overlay and using a material with a high refractive index for the cavity medium. Moreover, the transmissive colors on a flexible substrate are demonstrated, presenting that changes in both the resonance wavelength and the transmission efficiency are nearly negligible when the color filters are bent with a bending radius of 5 mm and over 3000 times bending tests. The described approach could pave the way for various applications, such as colored displays, decorative solar panels, and image sensors.
Lee et al. (Thu,) studied this question.