Key points are not available for this paper at this time.
The temperature of photovoltaic cell is reduced by heat transfer fluids (HTF) in cooling channels, which are attached to the back of the photovoltaic module in a hybrid thermal photovoltaic system (PV/T). Recently, nanofluids have been implemented as HTF's in PV/T systems. Various types of nanofluids have been synthesized, prepared, and tested, however, not a specific type in particular. In this paper, experiments were carried out using Single-walled carbon nanotubes (SWCNTs) nanofluids. The proposed nanofluid consisted of a primary fluid that is water with a volume ratio of 75.0% and glycol Ethylene with a volume ratio of 25% and a surfactant, Cetyltrimethylammonium Bromide(CTAB), in an amount of 0.5 mL. Single-walled carbon nanotubes (SWCNTs) were added in four weight ratios of 0.1%, 0.5%, 1.0%, and 2.0%. The samples were examined and compared based on their thermophysical properties, and from these properties, a volume fraction of 0.5% SWCNT was chosen to form the nanofluid. In this study, the performance characteristics of the PV/T were investigated. The results of the study showed that the proposed nanofluid caused an increase in the electrical power generated by 11.7% while the electrical efficiency of PV/T was increased up to 25.2% compared to the PV system. It is found that the cell temperature reduced by 18% on average for a whole day operation. The studied PV/T system produced an impressive overall efficiency of 71% compared to the PV system, which generated no more than 11%. SWCNTs have shown superior results in improving the performance of the studied PV/T system compared to other types of nanofluids used in PV/T systems in the literature.
Kazem et al. (Mon,) studied this question.