The ECG processor achieved 99.10% sensitivity and 99.5% specificity while detecting 13 abnormal cardiac rhythms at only 746 nW power consumption.
A novel ultra-low power ECG processor ASIC using a ternary neural network demonstrates high accuracy in detecting 13 abnormal cardiac rhythms, offering potential for long-term wearable or implantable health monitoring.
Absolute Event Rate: 0% vs 0%
This paper presents an ultra-low power electrocardiography (ECG) processor application-specific integrated circuit (ASIC) for the real-time detection of abnormal cardiac rhythms (ACRs). The proposed ECG processor can support wearable or implantable ECG devices for long-term health monitoring. It adopts a derivative-based patient adaptive threshold approach to detect the R peaks in the PQRST complex of ECG signals. Two tiny machine learning classifiers are used for the accurate classification of ACRs. A 3-layer feed-forward ternary neural network (TNN) is designed, which classifies the QRS complex's shape, followed by the adaptive decision logics (DL). The proposed processor requires only 1 KB on-chip memory to store the parameters and ECG data required by the classifiers. The ECG processor has been implemented based on fully-customized near-threshold logic cells using thick-gate transistors in 65-nm CMOS technology. The ASIC core occupies a die area of 1.08 mm2. The measured total power consumption is 746 nW, with 0.8 V power supply at 2.5 kHz real-time operating clock. It can detect 13 abnormal cardiac rhythms with a sensitivity and specificity of 99.10% and 99.5%. The number of detectable ACR types far exceeds the other low power designs in the literature.
Abubakar et al. (Mon,) reported a other. The ECG processor achieved 99.10% sensitivity and 99.5% specificity while detecting 13 abnormal cardiac rhythms at only 746 nW power consumption.