Key points are not available for this paper at this time.
The main objective of this work was to assess the performance of combined processes, adsorption/ photodegradation of the ciprofloxacin antibiotic (CIP). Adsorption was achieved on natural hydroxyapatite (nat-HA) in the batch mode. The effect of pH (3–12), initial ciprofloxacin concentration (C0, 25–200 mg L−1), adsorbent dose (m, 0.25–3 g L−1), and temperature (T, 298–328 K) on the ciprofloxacin adsorption capacity was studied. At 298 K, the maximum uptake of 147.7 mg g−1 was observed with pH close to 8, 1 g L−1nat-HA dose, and 150 mg L−1 initial CIP concentration. Adsorption was effective, with a removal percentage of 82% within 90 minutes of contact time. For ciprofloxacin adsorption onto nat-HA, a pseudo-second-order kinetic model is well-suited. The Langmuir isotherm model successfully fit the experimental data and the process was spontaneous and exothermic. The coupling processes (adsorption/photocatalysis) were examined and found to be highly effective. For the remaining concentrations, the maximum degradation efficiency and mineralization yield were ~100% and 98.5%, respectively, for 1 mg L−1 initial CIP. The combination of the strong adsorption capacity of natural hydroxyapatite and the high photocatalytic activity of TiO2 can be an effective technique for removing fluoroquinolone antibiotics from wastewater.
Cheikh et al. (Thu,) studied this question.