Effects of toolpath on defect phenomena in the incremental forming of thin polycarbonate sheets

Abstract Incremental sheet forming has been largely investigated in the last two decades because of its versatility and cost-effectiveness, which make it viable for manufacturing highly customized parts as well as small- and medium-sized batches. This process allows for reaching greater formability compared to conventional sheet-forming processes. In contrast, it is affected by defects like twisting, which strongly influence the geometric accuracy of the formed parts. These aspects are dramatically accentuated when forming soft materials like thermoplastics. With these premises, the following research aims to investigate the effects of the toolpath strategy on the occurrence of failures and defects in the incremental sheet forming under very severe process conditions. Cone frusta with a fixed wall angle were obtained by thin polycarbonate sheets, imposing four unidirectional helical trajectory-based toolpaths, one traditional, and three stair strategies. The analysis of the forming forces, the evaluation of the worked surfaces, and the monitoring of the defectiveness highlight the advantages of a stair toolpath strategy in terms of reduced twisting and loading and high surface quality, regardless of the lubrication conditions.