Key points are not available for this paper at this time.
Abstract Low‐temperature energy harvest, delivery, and utilization pose significant challenges for thermal management in extreme environments owing to heat loss during transport and difficulty in temperature control. Herein, we propose a light‐driven photo‐energy delivery device with a series of photo‐responsive alkoxy‐grafted azobenzene‐based phase‐change materials (a‐g‐Azo PCMs). These a‐g‐Azo PCMs store and release crystallization and isomerization enthalpies, reaching a high energy density of 380.76 J/g even at a low temperature of −63.92 °C. On this basis, we fabricate a novel three‐branch light‐driven microfluidic control device for distributed energy recycling that achieves light absorption, energy storage, controlled movement, and selective release cyclically over a wide range of temperatures. The a‐g‐Azo PCMs move remote‐controllably in the microfluidic device at an average velocity of 0.11–0.53 cm/s owing to the asymmetric thermal expansion effect controlled by the temperature difference. During movement, the optically triggered heat release of a‐g‐Azo PCMs achieves a temperature difference of 6.6 °C even at a low temperature of −40 °C. These results provide a new technology for energy harvest, delivery, and utilization in low‐temperature environments via a remote manipulator.
Ge et al. (Wed,) studied this question.