Key points are not available for this paper at this time.
Geosynthetic Reinforced Soil (GRS) walls have become increasingly popular as a result of their numerous advantages. In some cases these structures are constructed in a multi-tiered configuration, which makes their behavior more complicated. Nevertheless, the response of the multi-tiered walls is insufficiently explained by the existing design manuals and literature studies. This paper investigated the performance of GRS walls with multi-tiered configurations using two-dimensional (2D) finite element numerical models. This study compares the performance of two-tiered GRS walls with simple GRS walls (single-tiered). It also examines the impact of offset distance, backfill strength properties, and reinforcement parameters (vertical spacing and reinforcement length) on horizontal deformations and reinforcement tensile loads in two-tiered GRS walls. Adopting a multi-tiered configuration for GRS walls can significantly reduce both the horizontal wall deformation and the maximum reinforcement tensile loads. Additionally, the critical offset distance found in this study is significantly smaller than that recommended by the Federal Highway Administration (FHWA) guidelines. The finite element results also demonstrate that using high-quality backfill soil can minimize interaction between lower and upper tiers. Using a uniform reinforcement length of 0.6H for both tiers significantly reduces horizontal deformation compared to the FHWA recommendation of 0.6H and 0.35H for the lower and the upper tier respectively.
Ali et al. (Wed,) studied this question.