Geometry optimization of wall-jet collection device: A study of flow-field dynamics and particle motion

Wall-jet collection has been recognized as an advanced technique for mining polymetallic nodules that has significant potential for practical engineering applications. Optimizing the geometry of the collection device can improve collection efficiency and reduce environmental disturbance. In this study, 24 distinct structures of nodule-collection device were investigated using a computational fluid dynamics–discrete element method, which was validated by comparing with the experimental data. A key parameter, the wall-jet half-width coefficient Cc, was employed to examine the collection performance, including the collection efficiency, collection flow field, and particle trajectory. An assessment indicator derived from energy-consumption and substrate-disturbance metrics was proposed, and this allowed the identification of optimal device structures tailored to various requirements. The results showed that based on collection efficiency–jet flow rate (η–q) response curves, the collection performance can be categorized into two distinct patterns. When Cc ≤ 1.56, induced flow will occur, and η can reach 1.0; when Cc 1.56, a moving vortex that disturbs the particle trajectories is generated, and the jet escapes rightward, resulting in a decrease in η. The influences of geometric parameters on Cc exhibit coupled relationships, which is particularly noticeable in the relationship between the tangential angle of the jet and its thickness. The optimal device geometry varies for different criteria, and maximum reductions in substrate disturbance and jet energy consumption of 48.46% and 19.64%, respectively, were obtained with different optimization criteria. This study is expected to provide data to support the optimization of the structure of wall-jet collection devices.