Migration and Diffusion Characteristics of VOCs in a Semi-Enclosed High-Space Wood Chip Fuel Storage Shed

High-space industrial facilities often store substantial quantities of flammable volatile organic compounds (VOCs), posing significant fire and explosion hazards. This study employed computational fluid dynamics (CFD) to investigate the migration and diffusion characteristics of VOCs in a semi-enclosed, high-space wood chip fuel storage shed. A three-dimensional transient numerical model was developed based on a real-scale industrial prototype, incorporating the Realizable k−ε turbulence model with species transport equations. Validation using experimental data demonstrated good agreement between the model and experimental results, with a maximum relative error of 5.0%. A systematic assessment of key parameters was conducted, including time, ambient temperature, relative humidity, wood chip stack height, and VOCs type. Evaluation metrics comprised the surface-average mass fraction and the proportion of areas exceeding 5% of the lower explosive limit (LEL). The results show that peak concentrations occurred at 25~27 min. The system reaches quasi-steady state after 60 min. At 300~304 K, the lowest peak mass fractions are observed (0.31% and 0.43% at 19 m), yet the area exceeding 5% LEL was the largest. Moderate humidity (40~60%) reduces peaks by 0.06~0.11%. A stacking height of 7.5 m reduces peak values to 0.21% (left) and 0.28% (right), while a 10 m height increases the hazardous area to 48.87%. Low-polarity VOCs (C10H16) spread widely (34.10% exceeding 5% LEL area), whereas polar VOCs (C15H26O) accumulated locally (4.48%). These findings provide theoretical guidance for VOC hazard control and ventilation optimization in high-space biomass fuel storage facilities.