Key points are not available for this paper at this time.
Abstract Various sizing agents were prepared to enhance the interfacial properties between aramid fiber (AF) and polycarbonate (PC), as well as to enhance the mechanical properties of AF/PC composites. It was found that PC sizing agent, P‐GO sizing agent, and PSi‐GO sizing agent effectively coated the surface of AF from the FTIR and XPS and SEM results. The IFSS and mechanical properties of composites reinforced with fibers treated by the sizing agents exhibited significant improvement, as well as their single fiber tensile strength also improved. Specifically, when AF was treated with PSi‐GO sizing agent, the interfacial shear properties between AF and PC increased by a remarkable 78.69%, reaching 22.89 MPa compared to the original AF/PC composite, the tensile strength of the single‐filament exhibited an increment of 12.4% to 26.4 cN/dtex. Moreover, the tensile strength, flexural strength, and impact strength of the composite increased by 5.43%, 77.74%, and 54.71%, respectively. These improvement can be attributed to the GO with a higher concentration of chemical groups and excellent dispersion with modified with the silane agent. These findings suggest that coating the AF with sizing agents can effectively enhance its interfacial adhesion with the matrix, which is useful for its application as the reinforcement in the composites. Highlights Adding GO to the sizing agent to change the Aramid fabric surface properties. Silane coupling agent was used to improve the dispersion of GO on the fiber surface. GO modified sizing agent can improve the flexural strength, tensile strength, and interlaminar shear strength of the composites.
Zhang et al. (Wed,) studied this question.