Key points are not available for this paper at this time.
Abstract Terahertz (THz) devices, especially waveguide-type functional devices related to transmission and control, are severely scarce due to the lack of effective design and fabrication methods. Here, we experimentally demonstrate a waveguide type of THz narrow-band filter based on 3D-printed technology, which is realized by a cylindrical hollow metal structure with corrugated tube walls. The semi-cylindrical periodic corrugations are 3D printed on a photosensitive resin substrate material, followed by sputtering a layer of gold film on its surface to endow the structure with THz filtering functions. A hollow cylindrical corrugated waveguide is obtained by assembling two identical semi-circular corrugations together. The periodic structure with Bragg resonances can produce a frequency stop band, in which the propagation of THz waves is significantly suppressed. We print a wider section of corrugations in the middle of the waveguide, which destroys the perfect periodicity of the structure and forms a defect. Due to the local resonance caused by the defect, we observe an additional narrow-band transmission peak within the former stop band, which is a good candidate for THz filtering. The filtering bandwidth and extinction ratio are 1.8 GHz and 28 dB, respectively, and the Q-factor reaches 234. The proposed 3D-printed THz filter has the advantages of the simple structure, excellent performance, and easy integration, which can improve the existing THz systems in various applications.
Wang et al. (Fri,) studied this question.