Key points are not available for this paper at this time.
Abstract Laser powder bed fusion (LPBF) is a type of additive manufacturing (AM) technique characterized by multiple localized thermal processes that result in rapid heating and cooling. The thermal variations observed in the LPBF process can generate residual stress (RS) inside the fabricated part, impacting the surface integrity and geometric tolerances of the manufactured components. To reduce thermal variation during manufacturing, heat-assisted AM was employed, thereby minimizing RS and any thermal distortion that could occur during the fabrication of materials. The present research utilizes non-destructive x-ray diffraction to analyze the influence of an in-situ heated building plate and processing parameters on the RS distribution in Inconel 718 (IN718) fabricated by LPBF. This study examines the impact of two scanning procedures and three laser power levels and offers critical insights into both measurement techniques and RS characterization. By understanding the effect of the processing parameters on RS, we aim to enhance the quality of manufactured parts through process optimization. Post-processing heat treatment consistently reduced RS in all samples, regardless of laser power levels or scanning strategies. Combining a chess scanning strategy with 270 W laser power resulted in the most significant RS reduction in IN718.
Ramineni et al. (Tue,) studied this question.