In the event of a fault in a shipboard medium-voltage direct-current (MVDC) power system, a fault reconfiguration method issues control commands to the switchgear to execute switching actions, thereby redistributing power flow, isolating the faulted zone, and restoring power to the de-energized loads. Existing fault reconfiguration strategies mainly use classical optimization methods. These methods are usually centralized, and as the system scale increases, they suffer from the curse of dimensionality, which degrades real-time performance and reduces computational efficiency. This paper proposes a MADRL-based fault reconfiguration method for shipboard MVDC power systems. The proposed method considers load priority levels, maximizes total restored load, and improves load balancing. To this end, a QMIX-based method, Dependency-Corrected QMIX with Action Masking (Dep-QMIX-Mask), was developed, introducing a dependency correction mechanism to handle action dependencies during decentralized execution and applying action masking to rule out invalid switching actions under operational constraints. A shipboard MVDC power system model was established and used for validation. Across three representative fault cases, Dep-QMIX-Mask achieves served load rates of 0.88, 0.67, and 0.43, with SLR improvements of up to 19.6% over baseline methods. It consistently produces feasible switching sequences in all 20 independent runs per case, improving feasibility by 10 to 30 percentage points. In addition, Dep-QMIX-Mask improves zonal load balancing by reducing the PUR variance by 40.5% to 99.2% compared with baseline methods. These results indicate that Dep-QMIX-Mask can generate feasible sequential reconfiguration strategies while improving both load restoration and load balancing.
Yao et al. (Thu,) studied this question.