Compared to purely serial robots or cable-driven parallel robots (CDPRs), cable-driven hybrid robots (CDHRs) combine the advantages of both, addressing their limitations and enabling the execution of complex tasks. The series-parallel coupling structure increases the complexity of the system, complicating modeling, calibration, and force-closure workspace (FCW) analysis. This study develops a CDHR system equipped with various sensors and proposes methods for series-parallel coupling modeling, workspace analysis, and self-calibration of complex systems. First, the modular design requirements for the CDHR are analyzed, comprising an 8-cable parallel drive and a 4-degree-of-freedom serial manipulator. Second, a kinematic model of the CDHR with series-parallel coupling was derived, and the positions of the dynamic anchor seats were optimized using an optimization algorithm. Based on these optimized results, a modeling and analysis method for the statics and FCW is proposed. Furthermore, considering the complex and interdependent structural parameters of the system, a method for the self-calibration of the system parameters and trajectory planning for the CDHR is presented. Finally, experimental validation on both simulations and a physical prototype confirmed the effectiveness of the proposed methods. The developed prototype and the proposed method provide a basis for high-precision operations in large spaces, operations in dangerous/extreme environments, and automated operations in logistics/warehousing.
Xue et al. (Tue,) studied this question.