The mechanical behavior of loess under varying moisture conditions plays a critical role in the stability of slopes and foundations in loess regions. Owing to its high porosity and metastable structure, loess is particularly sensitive to moisture-induced strength degradation. Although geogrid reinforcement has been widely adopted to improve soil stability, the combined influence of moisture condition, reinforcement characteristics, and confinement on the shear behavior of loess remains insufficiently understood. In this study, consolidated undrained (CU) triaxial tests were conducted on partially saturated loess reinforced with glass fiber geogrids (GFGs) and basalt fiber geogrids (BFGs) under different moisture contents (13–17%) and confining pressures (100–300 kPa). The effects of geogrid type, reinforcement configuration, and confinement on shear strength and deformation behavior were systematically examined. The results indicate that geogrid reinforcement significantly enhances the shear strength, stiffness, and ductility of loess, particularly under low to moderate confining pressures. Increasing the number of reinforcement layers resulted in peak strength improvements of up to approximately 25% and promoted a transition from brittle to ductile behavior. Distinct reinforcement responses were observed: GFG exhibited higher initial stiffness and more rapid mobilization, whereas BFG demonstrated progressive tensile mobilization and superior residual strength. Furthermore, a modified Unified Twin-Shear Strength Theory (UTSST) incorporating a strain-dependent reinforcement mobilization coefficient was proposed, which provided an empirical representation of the observed strength evolution with good agreement with the experimental results (R2 > 0.96).
Xiong et al. (Wed,) studied this question.