Abstract The lower thermal behavior of solar-based thermal systems limits the contribution of solar systems to meet current energy demand of industries. The Flat Plate Solar Air Heater (FPSAH) is extensively utilized in many applications requiring reasonable heat but struggles from inherent limitation in convective heat release and mediocre efficiency. In this study, the challenges are addressed with a novel means of dual mode augmented technique. This mode integrated absorber surface of the FPSAH system by introducing two radiation reflectors on either edge of the rectangular channel. Primarily these reflectors forward back the solar irradiance over the absorber plate, thus increasing the actual solar flux. Simultaneously, a W-shaped artificial rib roughness pattern is merged on the underneath (air-side) of the absorber plate. This coarseness is intended to persuade measured flow disorder inside the channel that disrupt the boundary layer development and may consequently augment convective heat transfer. Experimental testing is conducted with different combinations of roughened absorber surface and radiation reflectors. The performance enhancement is evaluated in terms of Nusselt number (Nu) and thermal efficiency of the FPSAH system. The maximum Nu achieved is 1. 63 times higher using a set of radiation reflectors along with W-shaped roughness on the absorber surface compared to the plain configuration without radiation reflector. Finally, artificial neural network (ANN) and machine learning (ML) algorithms were used to predict Reynolds number in each set of experiments. A very good curve fitting was achieved by the Robust Regression algorithm with R² = 0. 99 for the testing dataset and R² = 0. 94 by the Random Forest Regression algorithm for ML.
Jain et al. (Mon,) studied this question.