This study investigates the acoustic pressure field in a 20 kHz sonoreactor filled with water. A modular sonoreactor and ultrasonic stack were developed at the Łukasiewicz-ITR laboratory. Modal, harmonic response, and harmonic acoustic analyses were performed using the ANSYS Workbench, considering two reactor heights (800 mm and 550 mm). Experimental tests using aluminium foils were conducted, and the results were compared with FEM simulations. The bulk viscosity of the liquid was found to have a significant impact on the numerical results. The novelty of this work lies in estimating an effective bulk viscosity that enables accurate representation of the pressure field distribution within the tank. This parameter is theoretical and, as defined in this study, accounts for the overall energy losses associated with cavitation rather than representing an intrinsic material property. The proposed simulation approach reduces computational time and cost while maintaining agreement between predicted and experimental pressure fields. Good consistency was achieved when the effective bulk viscosity was set to 1300 Pa·s. The presented methodology may support further development and optimization of sonoreactors. It enables rapid evaluation of various geometries, providing a foundation for prototype development or subsequent detailed analyses.
Wiśniewska et al. (Sun,) studied this question.