The urgent need to mitigate carbon dioxide (CO2) emissions from fossil-fuel-based electricity generation has driven research into advanced materials for post-combustion carbon capture. This paper presents a modified solvothermal technique to synthesize zinc (Zn) and magnesium (Mg) based MOF-74 suitable for CO2 capture from coal-fired power plants. The materials were synthesized through a solvothermal method using N,N-dimethylformamide (DMF) as the primary solvent, and subsequently characterized using Brunauer–Emmett–Teller (BET) surface area analysis, Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), and thermogravimetric analysis (TGA). Both MOFs contained oxygen-containing functional groups and were thermally stable up to 430 °C and 600 °C respectively, making them ideal for carbon capture. The low-pressure N2-BET surface areas were 55 m2/g and 24.73 m2/g. In conclusion, the Zn material had a mesoporous structure, making it more favorable for carbon capture. It was found that prolonged synthesis time weakened the MOF structure. Future work should experimentally evaluate CO2 capture from coal-derived flue gas using Zn/Mg-MOF-74 materials, investigating adsorption behavior and kinetics through isotherm and kinetic models, while also assessing the effect of varying Zn: Mg ratios under optimized synthesis conditions.
Makuwa et al. (Wed,) studied this question.