Drifting fish aggregating devices (DFADs) are central to tropical tuna purse-seine fisheries, yet their hydrodynamic performance under realistic seas has not been adequately addressed, particularly for emerging eco-friendly designs. A three-dimensional framework based on computational fluid dynamics is developed to assess the motion response and mooring loads of full-scale DFADs comprising raft buoys, biodegradable cotton rope, and iron sinkers, using four buoy layouts (Models A to D). Unsteady Reynolds-averaged Navier–Stokes (URANS) simulations are performed with a realizable k–ε closure, volume of fluid (VOF) free-surface capturing, the Euler overlay method, dynamic overset meshes, and catenary mooring coupling. Regular waves representative of operational conditions (T = 1.40 to 2.40 s, H = 0.10 to 0.40 m) are imposed via a VOF wave-forcing technique, and mesh/time-step sensitivity analyses demonstrate the accurate reproduction of the first-order wave elevation (error < 0.8%). Surge drift per cycle and heave response amplitude operators, with the relative mooring force, are evaluated as functions of the relative wavelength (λ/La) and wave steepness (H/λ). The results reveal that the buoy layout exerts first-order control on DFAD dynamics, whereas short, steep waves dominate motion and line loads. The intermediate end-point sinker mass achieves a favorable balance between motion suppression and mooring load control, whereas distributing a fixed total sinker mass along the rope reduces heave response and mooring force by improving the tension redistribution and overall stability. Across all sea states, Models A and D reduced motion envelopes and mooring forces, indicating their suitability as robust, low-impact configurations. The proposed framework and design recommendations provide quantitative guidance for optimizing eco-DFAD geometry and deployment strategies, supporting safer and more sustainable DFAD-based tuna fisheries.
Chen et al. (Fri,) studied this question.