Fault-controlled reservoirs are characterized by strong heterogeneity and diverse flow types. Existing water-coning calculation methods cannot accurately describe the complex oil–water distribution within reservoirs exhibiting a distinct “core–damage zone” architecture. To address this limitation, the main goal of this study is to develop a zonal water-coning calculation framework tailored to these highly heterogeneous structures. Methodologically, the Forchheimer equation is utilized to describe the entire reservoir system, with region-specific simplifications applied based on dominant flow mechanisms: in the high-velocity core zone, the viscous term is ignored; in the low-velocity damage zone, the inertial term is neglected; and the transition zone employs the complete Forchheimer formulation. The results indicate that the water-coning curves in the core and transition zones are significantly steeper as the radial distance decreases compared to the damage zone. Specifically, in a field application at the Fuman Oilfield, the calculated theoretical critical production rate of the core zone (5.39 × 10−2 m3/s) is three orders of magnitude higher than that of the damage zone (1.45 × 10−5 m3/s). In conclusion, this massive zonal disparity demonstrates the severe bottleneck effect of the high-permeability core under a unified wellbore pressure drawdown, theoretically validating the necessity of deploying segmented completions and targeted water-control strategies to prevent premature water breakthrough.
Jiang et al. (Sun,) studied this question.