This study explores interpretation methods for determining the preconsolidation stress from one-dimensional consolidation test results. Twelve reconstituted clay specimens with targeted preconsolidation stresses of 60 and 120 kPa were prepared using commercial kaolinite and marine clays collected from coastal regions of South Korea. Five representative interpretation methods were applied, and the influence of maximum applied stress levels of 320, 640, and 1280 kPa was evaluated. The results indicate that the estimated preconsolidation stress varies considerably depending on both the interpretation method and the maximum applied stress, particularly for rounded compression curves with gradually changing virgin compression slopes. To address these limitations, a new interpretation approach is proposed. The method utilizes the rebound slope obtained from an unload–reload cycle and defines the virgin compression line through linear regression without identifying the recompression–virgin compression boundary. The proposed method demonstrated reduced sensitivity to the maximum applied stress and provided more reproducible estimates for rounded compression curves, although further validation using natural clays considering sample disturbance effects is required.
Gwak et al. (Fri,) studied this question.