This research evaluates the feasibility of using a lignocellulosic biosorbent prepared from mature leaves of Asplenium scolopendrium (produced through simple mechanical processing of the leaves, without applying any chemical modification or heat treatment) for the removal of methylene blue from water. Before and after adsorption the material was characterized using SEM technique and color analysis. Subsequently, the adsorption behavior was analyzed by examining equilibrium, kinetic, and thermodynamic aspects of the process. The equilibrium data were best represented by the Sips isotherm model, while the adsorption rate followed the Avrami model. Thermodynamic evaluation indicated that the retention of the dye occurs predominantly through a physical adsorption mechanism, while a minor contribution from chemisorption may be present, slightly enhancing the overall dye uptake. Process optimization was performed using the Taguchi experimental design, which also allowed the identification of the most significant operational variable. In addition, analysis of variance (ANOVA) was applied to quantify the contribution of each factor affecting dye removal efficiency. Among the investigated variables, time showed the strongest influence (72.65%), whereas temperature had a negligible effect (1.33%). The maximum adsorption capacity reached 174.1 mg/g, surpassing the performance of several comparable biosorbents reported in the literature. Overall, the findings demonstrate that Asplenium scolopendrium (hart’s-tongue fern) leaves represent an inexpensive, sustainable, and efficient material for eliminating methylene blue from aqueous solutions.
Mosoarca et al. (Tue,) studied this question.