Oily sludge is an industrial waste generated from oil field exploitation， petroleum refining， transportation， and usage. Every year， a great amount of oily sludge is produced worldwide， which will bring huge storage cost and cause serious environmental pollution problems if not properly treated. In this article， we carried out a trial study to mix the oily sludge after pyrolysis and lime with loess， and applied it to filling engineering to utilize the residue. The effects of different compactness， water content， and consolidation confining pressure on the mechanical properties of oily sludge-lime loess under the optimal mix ratio were studied. The research results showed that compaction degree， water content， and confining pressure all had a great influence on the stress-strain curve. Under the conditions of high compaction， low water content， and low confining pressure， most of the stress-strain curves were strain softening curves. With the increase of water content and confining pressure， the degree of compaction decreased， and the stress-strain curve gradually transitions from softening type to hardening type. And with the increase of compaction degree and decrease of the water content， both the cohesion and internal friction angle increased. The soil showed shear slip failure under low confining pressure and low water content， and lateral expansion failure under other conditions. The research results can provide theoretical and experimental support for the treatment and engineering application of oily sludge residue.
Zhang et al. (Sun,) studied this question.