The capacitance resistance model (CRM) is an analytical tool widely used to forecast reservoir performance in enhanced oil recovery (EOR) methods. By representing flow dynamics and the connectivity between injection and production wells through the parameter of interwell connectivity, CRM offers fast computational processing and minimal input data requirements. These advantages make CRM a practical alternative for rapid reservoir analysis, especially when full-scale numerical simulations are infeasible due to time and budget constraints. CRM, rooted in material balance and productivity equations, uses injection/production rates and bottom-hole pressure data to construct reservoir models through optimization techniques, which can then be combined with oil fractional flow models for predictive purposes. Initially designed for waterflooding operations, CRM has seen limited but promising applications in gas injection projects, where research remains incomplete. This study presents a new formulation of CRM tailored for immiscible gas injection, incorporating the pseudo-pressure concept coupled with a saturation profile. The pseudo-pressure concept is a mathematical transformation that linearizes gas flow equations by accounting for variations in gas compressibility and viscosity with pressure. The proposed CRM was evaluated using a PUNQ-S3 benchmark reservoir model in the CMG IMEX black oil simulator, involving two injectors and four producers. History- matching results for fluid production rates showed that the newly developed CRM achieved the lowest NRMSE, outperforming other CRM models across a wide range of reservoir properties. Sensitivity analyses were conducted to examine the effects of gas and oil PVT properties on the model’s performance. The newly developed CRM, incorporating the pseudo-pressure concept and saturation profiles, demonstrates superior performance in predicting fluid production rates, achieving an average NRMSE of 15.3% in a base case scenario, compared to other tested CRM models. Additionally, the sensitivity analysis on the effect of fluid properties shows that higher gas viscosity, lower gas formation volume factor, and increasing oil API gravity improve the CRM model’s performance, and under all tested conditions the newly developed CRM provides the most accurate production history match. This study not only establishes the new CRM as a robust and accurate predictive tool for immiscible gas injection but also provides a comprehensive discussion on reservoir parameter ranges and model limitations, advancing the applicability of CRM in EOR processes.
Zhanabayeva et al. (Sun,) studied this question.