Key points are not available for this paper at this time.
The commercial manufacturing of perovskite solar modules (PSM) suffers from stability concerns and scalability issues. We demonstrate a hole‐conductor‐free printable solar module embodiment, which employs a triple layer of mesoporous TiO 2 /ZrO 2 /carbon as scaffold, and is infiltrated by a mixed cation lead halide perovskite (5‐AVA) x (MA) 1−x PbI 3 as a light harvester. Here, hole conductor or Au reflector are not employed, and instead, the back contact comprises simply a printed carbon layer. Upon optimizing the thickness alignment of the triple mesoscopic layer and the design of the active area, the unit cell shows 14.02% power conversion efficiency (PCE) under 100 mW cm −2 condition, while a larger area of 10 serially connected cells module (10 × 10 cm 2 ), shows a 10.4% PCE on an active area of 49 cm 2 . Light‐soaking stability of 1000 h has been demonstrated, as well as local outdoor stability of 1 month and a shelf‐life stability of over 1 year. This paves the way for the realization of efficient and stable large‐area PSMs for industrial deployment.
Hu et al. (Tue,) studied this question.