Key points are not available for this paper at this time.
A new method called SRICOS is proposed to predict the scour depth z versus time t around a cylindrical bridge pier of diameter D founded in clay. The steps involved are: (1) taking samples at the bridge pier site; (2) testing them in an erosion function apparatus to obtain the scour rate ż versus the hydraulic shear stress applied τ; (3) predicting the maximum shear stress τmax, which will be induced around the pier by the water flowing at vo before the scour hole starts to develop; (4) using the measured ż versus τ curve to obtain the initial scour rate żi corresponding to τmax; (5) predicting the maximum depth of scour zmax for the pier; (6) using żi and zmax to develop the hyperbolic function describing the scour depth z versus time t curve; and (7) reading the z versus t curve at a time corresponding to the duration of the flood to find the scour depth that will develop around that pier. A new apparatus is developed to measure the ż versus t curve of step 2, a series of advanced numerical simulations are performed to develop an equation for the τmax value of step 3, and a series of flume tests are performed to develop an equation for the zmax value of step 5. The method is evaluated by comparing predictions and measurements in 42 flume experiments.
Briaud et al. (Thu,) studied this question.