Artisanal gold mining (AGM) activities are increasing globally and rely on rudimentary methods, such as amalgamation, to recover gold. In this study, mercury (Hg) metallurgical balances were conducted in 18 operations and gold (Au) balances in 35 operations, at a processing site serving approximately 4000 miners in the Korokpa mining area in Minna, Niger State, Nigeria. Ore processing involves grinding ore in hammer mills to below 1 mm, concentrating gold in sluice boxes, followed by amalgamating free gold particles in the concentrate. The results showed an average Au feed grade of 1.74 g/t and an average Au recovery from gravity concentration of 42.7%. Chemical analysis of the gravity separation tailing size fractions indicates that Au is lost in coarse fractions due to poor Au liberation and in fine fractions due to inefficiency in the sluicing process. Hg lost in the tailings was calculated as the mass balance difference between Hg added and the sum of Hg recovered through filtration and volatilized Hg in bonefires. It was found that 34% of Hg was lost during amalgamation, by volatilisation (18%) and with tailings (17%). The Hg lost-to-Au produced ratio was 2.6. By optimising procedures for grinding, classification, and concentration, the efficiency of recovery can be improved. Implementing a simple Hg recovery method, such as using a retort for condensation, and improving amalgam heating time can help miners minimise environmental loss.
Anene et al. (Thu,) studied this question.