Oblique detonation engines have been proposed for hypersonic propulsion because detonation-based heat addition can, in principle, provide rapid energy release with reduced total-pressure penalties. We investigate non-premixed injection/mixing of an RP-3 aviation-kerosene surrogate in a constrained supersonic channel and its impact on oblique-detonation initiation, stabilization, and static pressure gain. Numerical simulations are performed for a Mach 8 inflow representative of a 30 km altitude condition using an OpenFOAM v7-based reacting-flow solver. We analyze the pressure-gain process following detonation onset, quantify the effects of the inducer-ramp angle, and qualitatively assess the predicted initiation/stabilization trends against direct-connect hot-fire experiments. The results show that non-premixed injection into a supersonic crossflow yields limited mixing over the available mixing length and results in a strongly stratified inflow to the combustor. In the constrained passage, a train of reflected shocks forms and progressively reduces the total-pressure recovery factor along the mixing section, which asymptotically approaches ~0.49. In the combustor, the inducer-ramp angle controls whether and how a stabilized oblique detonation can be established. For a 25° ramp, no self-sustained ODW is obtained under the present conditions, whereas stabilized ODWs are observed for 30° and 35° ramps, exhibiting abrupt and smooth topologies, respectively. These initiation thresholds and stabilized morphologies show qualitative consistency with the direct-connect observations. Due to fuel stratification, pressure gain varies among streamlines but consistently follows a “primary compression–plateau–secondary pressure rise” sequence; the secondary stage contributes approximately 17.54–27.98% of the static pressure rise.
Wu et al. (Sat,) studied this question.