PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
July 13, 2002Macromolecules338 citations

Novel Sulfonated Polyimides as Polyelectrolytes for Fuel Cell Application. 2. Synthesis and Proton Conductivity of Polyimides from 9,9-Bis(4-aminophenyl)fluorene-2,7-disulfonic Acid

View Full Paper
XGXiaoxia GuoJFJianhua FangTWTatsuya Watari

Key Points

Key points are not available for this paper at this time.

Abstract

A new sulfonated diamine monomer, 9,9-bis(4-aminophenyl)fluorene-2,7-disulfonic acid (BAPFDS), was synthesized by direct sulfonation of the parent diamine, 9,9-bis(4-aminophenyl)fluorene (BAPF), using fuming sulfuric acid as the sulfonating reagent. A series of sulfonated polyimides with different sulfonation degrees were prepared from 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTDA), BAPFDS, and common nonsulfonated diamines. The resulting sulfonated polyimides generally showed good solubility in m-cresol and DMSO. Proton conductivities of these polyimide membranes were measured as the functions of relative humidity and temperature. The resulting homopolyimide, NTDA-BAPFDS, displayed proton conductivities quite similar to those of Nafion 117 in the whole humidity range (RH < 100%). At 100% relative humidity, all the BAPFDS-based polyimide membranes showed proton conductivities similar to or higher than those of Nafion 117. In addition, BAPFDS-based polyimide membranes exhibited much better water stability than those derived from a widely used sulfonated diamine, 2,2‘-benzidinedisulfonic acid (BDSA), with similar IEC. This is probably because of the higher basicity of BAPFDS, which is favorable for maintaining the stability of imido rings.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Guo et al. (2002) studied this question.

synapsesocial.com/papers/6a15bc7f72316eef384e2a89https://doi.org/10.1021/ma020260w
Ask AI
Helpful
Bookmark
Share
View Full Paper