Environmental Impact of Wind Farms

The aim of this article is to analyse the global environmental impact of wind farms, i.e., the effects on human health and the local ecosystem. Compared to conventional energy sources, wind turbines emit significantly fewer greenhouse gases, which helps to mitigate global warming. During the life cycle of a wind farm, 86% of CO2 emissions are generated by the extraction of raw materials and the manufacture of wind turbine components. The water consumption of wind farms is extremely low. In the operational phase, it is 4 L/MWh, and in the life cycle, one water footprint is only 670 L/MWh. However, wind farms occupy a relatively large total area of 0.345 ± 0.224 km2/MW of installed capacity on average. For this reason, wind farms will occupy more than 10% of the land area in some EU countries by 2030. The impact of wind farms on human health is mainly reflected in noise and shadow flicker, which can cause insomnia, headaches and various other problems. Ice flying off the rotor blades is not mentioned as a problem. On a positive note, the use of wind turbines instead of conventionally operated power plants helps to reduce the emission of particulate matter 2.5 microns or less in diameter (PM 2.5), which are a major problem for human health. In addition, the non-carcinogenic toxicity potential of wind turbines for humans over the entire life cycle is one of the lowest for energy plants. Wind farms can have a relatively large impact on the ecological system and biodiversity. The destruction of animal migration routes and habitats, the death of birds and bats in collisions with wind farms and the negative effects of wind farm noise on wildlife are examples of these impacts. The installation of a wind turbine at sea generates a lot of noise, which can have a significant impact on some marine animals. For this reason, planners should include noise mitigation measures when selecting the site for the future wind farm. The end of a wind turbine’s service life is not a major environmental issue. Most components of a wind turbine can be easily recycled and the biggest challenge is the rotor blades due to the composite materials used.