Two semiflexible piezoelectric composite plate structures were developed, incorporating 1 × 9 and 2 × 9 arrays of PZT elements mounted on brass discs and mechanically secured by pop rivets within a thin plastic foil spacer positioned between two copper-clad PCB layers. This configuration provides reliable electrical contact, adequate mechanical compliance, and efficient conversion of mechanical vibration energy into electrical energy. In addition, a multifunctional thermoelectric device was realized, consisting of four cubic modules arranged around a rectangular tube and enabling both handheld operation and coupling to hot or cold surfaces. Each cube is equipped with optimized finned heat sinks and integrates four thermoelectric elements on each face. Experimental results show that each cube generates approximately 6 mW, when handheld and with icy water injected into the central tube, demonstrating its suitability as a compact and versatile thermal energy harvester. Under low-light conditions, a solar panel is supplemented by this hybrid piezoelectric–thermoelectric energy harvesting system that combines the output of a piezoelectric composite plate with the dual outputs of a thermoelectric device using an electronically isolated summing block to ensure source decoupling. Energy storage and management are implemented using a capacitor buffer for the piezoelectric device, two voltage boosters for the thermoelectric outputs, and an automatic ultra-low-power pulse width modulation buck regulator for charging supercapacitors at 5 V.
Zarnescu et al. (Mon,) studied this question.