Tangential turning produces an asymmetric cutting-force system that may cause tool and workpiece deflection, leading to cylindricity, coaxiality, and roundness deviations in practice. This study investigates the relationships between three cutting force components and form errors during tangential turning of 42CrMo4 steel. Tangential, axial, and radial forces were measured under systematically varied cutting speed, feed, and depth of cut, and the resulting cylindricity, coaxiality, and roundness parameters were obtained through precision form measurements. The depth of cut showed the strongest influence on cutting forces, with high correlations to all components (r = 0.709–0.870). Feed was most closely associated with coaxiality error (r = 0.730), while cutting speed was primarily related to cylindricity deviation (r = 0.766). The novelty of this work lies in the combined and quantitative analysis of full cutting-force components and multiple form–accuracy descriptors within a single experimental framework for tangential turning. The results directly link process load to geometric accuracy and provide guidance for selecting cutting parameters to improve dimensional precision in tangential turning of alloy steels.
István Sztankovics (Sat,) studied this question.