Synapse

← 50th U.S. Rock Mechanics/Geomechanics Symposium

Papers in 50th U.S. Rock Mechanics/Geomechanics Symposium

Page 6 · newest first

  1. A Novel Workflow for Estimating Anisotropic Mechanical and Stress Profile in Unconventional Reservoirs: Utilizing Stoneley Wave Inversion in Data-Rich Wells and Integrating Machine Learning in Data-Limited Wells50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  2. The transfer learning strategy for 3D post-stack seismic data reconstruction using SR-CNN50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  3. Physical Property Evolution and Intrinsic Mechanisms of shale hydration: Insights from Multi-lithofacies and Multi-Scale Experiments50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  4. Predicting the mechanical parameters of oil sands using digital rock cores and finite element method50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  5. In-Situ Stress Measurements for Stability Analysis of Room and Pillar Rock Salt Mines: A Case Study from the Salt Range, Punjab, Pakistan50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  6. Near-tip Behavior of a Shallow Hydraulic Fracture with Small Toughness50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  7. Reservoir-Scale Application of Relative Permeability Experiment Results and Impact on CO2 Plume Propagation50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  8. Joint DSS and DAS monitoring experiment for strain evolution during hydraulic fracturing process50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  9. Digital Representation and Mechanical Simulation of Rock Microstructures50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  10. Upscaling fracture aperture fields using self-affine methods with evaluation against laboratory flow measurements50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  11. Influence of cold waterflooding on reservoir geomechanics in Brazilian pre-salt reservoirs50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  12. Developing the 3D geological model in a sedimentary rock slope considering the fracture intensity distribution using borehole and LiDAR information50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  13. Digital characterization methods of microscopic structure of cuttings in deep strata50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  14. Experimental and Numerical Analysis of Fracture Conductivity in Granite Cores Using Newtonian and Non-Newtonian Fluids50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  15. Early Identification Technology for Overflow Induced by Gas and Oil Invasion During Drilling50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  16. Long-term Containment Evaluation of the Carbon Storage Feasibility Study in Offshore China50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  17. Fast permeability measurements of tight rock: Theoretical study and experimental validation50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  18. Scaling laws between fault displacement, lithology and damage zone widths in carbonates50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  19. Does High Performance Water Based Mud Offer Superior Wellbore Strengthening Benefits Compared to Traditional Synthetic Based Muds?50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  20. Evaluation of Small-Scale Damage Evolution in Uniaxial Compression Based on Damage Connectivity50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  21. In-situ testing and observations of the impact of earthquakes on a shallow segment of the San Andreas fault50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  22. Laboratory Ultrasonic Measurements on Cambrian Sands: Implications for Seismic Monitoring in Deep CO2 Sequestration Projects50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  23. High-Resolution Geomechanics Modelling of Thermal and Hydraulic Effects on Wellbore Integrity and Caprock Stability During CO2 Injection50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  24. A Numerical Study on Rock Drilling with Abrasive Waterjet Considering Abrasive Particle Size50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  25. Chemo-Mechanical Investigation of Caprock Integrity and Leakage Risks in Underground Hydrogen Storage: a Focus on Shale Discontinuities50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  26. An analytical model to determine a reservoir capacity for wastewater disposal with consideration of geomechanics and extractions50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  27. A Computational Fluid Dynamics Model for Temporary Plugging Balls Transport in a Multi-Clusters Horizontal Wellbore50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  28. Prioritizing the mitigation of legacy geomechanical mine hazards using a risk-based approach50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  29. Development Risk Matrix50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  30. Long-Term Coupled Thermal-Hydro-Mechanical Simulation of Heat and Gas Transport in a Deep Geological Nuclear Waste Repository in Opalinus Clay50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  31. Geochemical Interactions of Proppants with Utah FORGE Fluids: Insights from Moderate-Temperature Experiments50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  32. Integrating Geotechnical Analysis and Parametric Design for Underground Mine Project through a Collaborative Approach50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  33. Mechanical Stratigraphy and Properties for Saudi Arabia's Jurassic Reservoir - Caprock Sequences: Implications to CO2 Storage and Seal Integrity50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  34. Investigation of Fracturing in Concrete Made of Mine Tailing-Based Lightweight Aggregates by Ultrasonic Imaging and Digital Image Correlation50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  35. THM Analysis for Assessing Geothermal Energy Production from the Burning Jharia Coal Field, India50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  36. Scalable Geomechanical Modeling for CO2 Sequestration Using Progressive Neural Operators with Low-Rank Adaptation50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  37. Integrated Geological and Geomechanical Modeling: Its importance for cost reduction and value maximization in Pre-Salt Projects of the Mero Field, Santos Basin50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  38. Impact of Spontaneous Generation of Splay Faults on Stress Heterogeneity in Accreting Sediments50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  39. Experimental Validation of Fiber Bragg Grating (FBG) Measurement on Early Time Downhole Cement Stress50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  40. Supercritical CO2-Induced Mineral Transformations in Shale: Implications for Permanent Carbondioxide Sequestration50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  41. Evaluating In-Situ Block Volume Distribution for Prediction of a Rockfall Volume Distribution in Glenwood Canyon, Colorado50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  42. A full 3D hydraulic fracturing simulator based on the finite element method and its analytical and physical verifications50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  43. Ranked Block Model, an integration of rockmass behavior and mining characteristics into a resource model50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  44. On the influence of the device stiffness when measuring the swelling pressure in clayey rocks50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  45. Hydro-Mechanical Coupling of CO2 injection into Homogeneous and Naturally Fractured Rock Mass with Permeable Matrix50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  46. Physics-Informed Neural Network Surrogate Modeling of Pressurized Cavity In Homogeneous and Bilayered Media50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  47. Numerical Simulation of the Circulation Tests in 2024 at the Utah FORGE Site50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  48. Assessing seismicity for three different mining periods at the Lucky Friday mine50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  49. How to Achieve Representative Roughness Measurement of a 3D Rock Discontinuity Surface50th U.S. Rock Mechanics/Geomechanics Symposium · 2025
  50. Impact of Stress History on the Breakthrough Response of Mudrocks as Caprocks for CO2 Storage50th U.S. Rock Mechanics/Geomechanics Symposium · 2025