July 14, 2025

Enhancing Tool Life and Surface Quality in High-Speed Milling of Ti6Al4V: A Comparative Study of Flood and Minimum Quantity Lubrication Cooling Strategies

View Full Paper

Ask AI

Bookmark

Authors

JYJiwang YanOklahoma State University MSMohd Azlan SuhaimiMalaysia University of Science and Technology SSSafian SharifUniversity of Engineering and Technology Lahore

Discussion

Member takes

Implication

Comparative analysis reveals minimum quantity lubrication reduces tool wear and surface roughness in ti6al4v machining, highlighting optimal conditions for efficiency.

Key Points

MQL cooling strategy significantly reduces tool wear by 83.16% compared to flood cooling at specific speeds and feeds.
At 1194 r/min, MQL achieves a maximum surface roughness improvement of 15.33% over flood cooling.
Increasing feed rates and lower spindle speeds raise cutting forces during high-speed milling of ti6al4v.
Optimal tool wear and surface quality occur at 1194 r/min and 358 mm/min using MQL cooling method.

Cite This Study

Yan et al. (2025) studied this question.

synapsesocial.com/papers/689a02b6e6551bb0af8cc3d4 https://doi.org/10.21203/rs.3.rs-7025954/v1

View Full Paper

Ask AI

Bookmark

Implication

Comparative analysis reveals minimum quantity lubrication reduces tool wear and surface roughness in ti6al4v machining, highlighting optimal conditions for efficiency.

Enhancing Tool Life and Surface Quality in High-Speed Milling of Ti6Al4V: A Comparative Study of Flood and Minimum Quantity Lubrication Cooling Strategies

Discussion

Member takes

Implication

Key Points

Cite This Study

Enhancing Tool Life and Surface Quality in High-Speed Milling of Ti6Al4V: A Comparative Study of Flood and Minimum Quantity Lubrication Cooling Strategies

Discussion

Member takes

Implication

Key Points

Cite This Study

Also Consider

Also Consider