Answers are grounded in this paper and cite their sources.
Experimental analysis shows improved wear resistance in pushrod bolts for diesel fuel pumps, indicating plasma coatings enhance durability.
The paper proposes and investigates the technology of restoring and strengthening the bolts of fuel pump plungers by plasma spraying a wear-resistant coating containing tungsten carbide (WC) with PS-12NVK-01 powder. The microstructure and microhardness of the sputtered and melted coatings were investigated. Comparative tests of the sputtered coatings showed higher wear resistance of the PS-12NVK-01 coating containing tungsten carbide compared to the PG-10N-01 coating. Also, a test batch of fuel pump plunger push rod bolts was tested on a vibration bench for 300 hours. The test results showed that the average wear of the bolts under the plunger heel is 2.2 times less than the serial ones (0.095 and 0.21 mm, respectively), and under the plunger plate - 2.25 times (0.195 and 0.44 mm, respectively).
No takes yet. Share an insight, caveat, or question.
Sergii Luzan (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: