Answers are grounded in this paper and cite their sources.
Study reveals significant changes in ionic resistance and porosity of graphite electrodes during lithiation, indicating potential for improved battery performance.
The crystalline volume change of graphite upon lithiation and delithiation is reported to lead to a change in the thickness and porosity of porous electrodes. Using electrochemical impedance spectroscopy, this study resolved the concomitant state-of-charge (SOC) dependent change of the ionic pore resistance (R_Ion ) of graphite electrodes via measurements conducted at low temperatures and stack pressures of 0.2 and 1.0 MPa. The pressure-dependent results reveal an increase of R_Ion upon complete lithiation of up to ~32% and ~45% at the lower and higher pressure, respectively. This data was combined with literature data on the volumetric expansion of graphite particles obtained from X-ray diffraction measurements to reveal a significant decrease in porosity upon lithiation. From there, the thickness changes of the graphite electrodes can be calculated. Inferable from this is a significant SOC-dependent variation in the MacMullin number (>30%), a crucial simulation parameter, of up to +40%. We observe a net pore volume decrease upon lithiation, particularly for a higher stack pressure. The reduction in the pore volume of up to 15% induces an electrolyte pumping effect. The study transfers these insights obtained from laboratory-type cells to commercial cells and addresses the recently described effect of electrolyte motion-induced salt inhomogeneity (EMSI).
No takes yet. Share an insight, caveat, or question.
Reuter et al. (2025) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: