Research on Cutting Force Modeling and Machining Performance of Discrete-Edge End Mill

To address the challenges of complex cutting force formation and low prediction accuracy in discrete-edge end mills, this study proposes a precise cutting force modeling method based on an effective chip slot function. An effective chip slot function is established to quantitatively characterize the dynamic variation of cutting edge engagement along different axial positions. Based on the instantaneous uncut chip thickness theory by Altintas, a high-precision cutting force model suitable for discrete-edge tools is developed. Experimental results show that the proposed model achieves an average prediction error of 4.82%, with a maximum error below 10%, demonstrating its high accuracy and practical applicability. Comparative experiments with conventional continuous-edge end mills under identical machining conditions indicate that the discrete-edge tool can reduce cutting forces (Fx by 7.2%, Fy by 3.2%), significantly suppress cutting vibrations (fluctuation coefficients reduced by 13.5% and 21.9%, respectively), and lower surface roughness to approximately one-sixth of that produced by conventional tools. The results confirm that discrete-edge end mills exhibit notable advantages in machining stability, cutting force control, and surface quality, providing a solid theoretical foundation for the design and process optimization of high-performance cutting tools.