Answers are grounded in this paper and cite their sources.
Experimental study shows improved electrical efficiency of solar PV panels in high ambient temperatures, indicating cooling techniques are effective.
Elevated operating temperatures reduce the efficiency and life of solar photovoltaic panels. This problem has greater severity in the high ambient temperature regions such as the hot and arid region of Thar Desert of Rajasthan, India. Use of a cooling technique can offer a solution to this problem. This paper presents results of an experimental study of a novel cooling scheme of longitudinal fins with phase change material (PCM) on the back side of the panel. Outdoor experimental study at Jodhpur, a city situated in the Thar Desert, showed that aluminium fins of 23 mm height affixed at a pitch of 35 mm to the back sheet of the PV panel along with 25 mm thick paraffin organic PCM in an acrylic sheet chamber on the back provide 9.5-14°C reduction in temperature of the front face of the panel as compared to the panel without any cooling system. The power output and electrical efficiency enhanced by an overall average of about 15.5% during the period 8:00-15:30 hours of the day of experimentation. The fins penetrating into the PCM facilitates heat transfer from the back plate to the PCM mass. The presented water free passive cooling technique can be successfully employed for the solar PV power plants installed in the hot and arid region of the Thar Desert of Rajasthan where the average daytime maximum ambient temperature of 32-42°C and night-time minimum temperature of 15-28°C in March-November duration are reported.
No takes yet. Share an insight, caveat, or question.
Khyani et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: