Answers are grounded in this paper and cite their sources.
New model improves prediction of overland flow velocity and soil erosion by incorporating vegetation impact.
The overland flow velocity is a fundamental hydraulic variable that directly impacts soil separation, sediment transport, and material deposition during soil erosion. Accurately predicting this velocity is challenging due to the significant spatial variability of overland flow hydraulic characteristics resulting from vegetation cover. To quantify the influence of vegetation stem coverage on mean flow velocity, fixed-bed scouring tests were conducted with 11 stem coverages (0%–20.42%), four slope gradients (3.49%–20.78%), and five unit discharges (0.278–2.222 L m−1 s−1). The results indicated that mean flow velocity initially increased and then decreased as stem coverage increased with a critical threshold value identified at 2.72%. Compared to studies on bare slopes, an increase in mean velocity ranging from 8.22% to 49.91% was observed on slopes with a stem coverage of 2.72%. The accuracy of velocity prediction can be improved by utilizing both discharge and slope gradient, as opposed to methods that rely solely on unit discharge for prediction. The adjusted correction coefficient (adj. R2) increased from 0.205–0.610 to 0.754–0.968. Finally, a dimensionally harmonious flow velocity prediction model based on the adjusted Manning's equation was established using the equivalent roughness, where flow resistance was found to be a combination of grain resistance and stem resistance. The developed model has been proven accurate in predicting experimental results (adj. R2 = 0.831, Nash–Sutcliffe efficiency coefficient = 0.830). The results obtained here enhance our understanding and prediction of soil erosion, providing further insights into the phenomenon.
No takes yet. Share an insight, caveat, or question.
Cen et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: