Answers are grounded in this paper and cite their sources.
Evaluation of three pretreatment methods in recycled concrete highlights enhancements in ITZ and durability.
Using recycled concrete aggregates (RCA) in new concrete production presents a sustainable solution to construction waste challenges, yet the inherent weaknesses of the interfacial transition zone (ITZ) between old and new cement matrices remain a critical limitation. This study evaluates three industrially feasible pretreatment methods-sieve-washing, water immersion, and resin impregnation - through a novel combination of semi-quantitative microstructural analysis and durability testing. Our findings demonstrate that resin treatment reduces carbonation depth by 38% compared to untreated RCA, primarily through pore structure modification. At the same time, water immersion enhances ITZ density by optimizing moisture release during hydration. However, resin-treated aggregates exhibited significantly lower compressive strength due to poor adhesion of the new paste. After 28 days, concrete with saturated recycled aggregate showed similar compressive (49.1 ± 0.7 MPa) and flexural strength (5.8 ± 0.3 MPa), but slightly higher carbonation depth than the concrete with only natural aggregate. The calcium concentration at a distance from the recycled grain indicates that saturated and resin pre-treatment influence the ITZ's density best. The research establishes a practical framework for selecting pretreatment methods based on measurable ITZ characteristics and project-specific durability requirements, advancing academic understanding and practical implementation of sustainable concrete technologies.
No takes yet. Share an insight, caveat, or question.
Kępniak et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: