Answers are grounded in this paper and cite their sources.
Comprehensive analysis reveals improved mechanical and wear properties in A713 alloys with FeNb, indicating potential aerospace applications.
This study explores the development of A713 aluminum alloy composites reinforced with 0–6 wt.% ferroniobium (FeNb) via a two-step electromagnetic stir casting route. FeNb addition promoted grain refinement, in-situ Fe₂Nb intermetallic formation, and increased dislocation density due to thermal mismatch, resulting in a 33% rise in microhardness (86.2 → 114.7 HV) and 21.4% improvement in ultimate tensile strength (184.18 → 223.65 MPa) at 6 wt.% FeNb. Conversely, ductility and impact strength decreased, indicating enhanced brittleness. Compressive residual stress increased from 90 MPa to 135 MPa, suggesting improved fatigue resistance. Fretting wear tests revealed a notable reduction in specific wear rate (1.406 → 1.004 mm³/Nm at 20 N; 3.012 → 1.855 mm³/Nm at 50 N) and lower friction. SEM-EDS analysis confirmed a wear mechanism transition from severe plastic deformation to micro-ploughing with oxidative smoothing. Differential thermal analysis showed dual endothermic peaks (560–620 °C) for 4–6 wt.% FeNb, confirming enhanced thermal stability and modified solidification behavior. Overall, the A713–6 wt.% FeNb composite demonstrated the best combination of strength, thermal resistance, and fretting wear performance, highlighting its potential for aerospace, automotive, and die-casting applications.
No takes yet. Share an insight, caveat, or question.
Vijay et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: